Acard ANS-9010B 5.25-inch SATA x1-to-6-slot DDR2 RAM Disk. RAM module not included.@ SCSI4ME.COM
Acard
ANS-9010B 5.25 inch SATA x 1-to-DDR2 RAM Disk
(RAM module not included)
The RAM disk seems like a bodily laborious disk to the
working system and applications. You select its dimension (relying on the quantity of
RAM in your system), drive letter, and file system. You possibly can copy, transfer and
delete information on it. Like a bodily disk, a RAM disk may also be shared in order to
be accessed by different computer systems on a community
Crucial distinction between a
RAM disk and a tough disk is entry velocity. The time taken for
a tough disk to maneuver its magnetic heads over the spinning disks (very similar to the
arm shifting over outdated vinyl document participant) is usually measured in
milliseconds (thousandths of a second). Whereas a RAM disk doesn’t have
mechanical components and its entry velocity is usually measured in nanoseconds
(billionths of a second). Entry to a RAM disk could also be 50 occasions quicker or extra
than to a tough drive.
RamDisk {hardware} offers a
suite of inexpensive excessive velocity utility acceleration instruments that may
allow your system to carry out at its most capability. The Actual Ram Disk product
line seems and acts similar to laborious drives.
Whenever you set up this extremely quick drive, you plug it into present laborious
disk and motherboard. As well as, all Actual Ram Disk merchandise have a number of
energy sources: an exterior DC enter and on-board rechargeable battery.
Overview
ACARD RAM Disk is a stable state disk make up DRAM reminiscence
modules, for quicker than the normal laborious drives and
flash drives. With the speedy random entry charge and shorter
entry time, RAM Disk is certainly appropriate for graphics
designs and database programs. It additionally helps an CF slot
for knowledge backup / restore to forestall knowledge misplaced.
Options
- Helps as much as 48GB quantity of reminiscence
- Helps ECC/Non-ECC DDR2 400/533/667/800**
- Computerized knowledge backup/restore between DDR2 reminiscence and CF
card - Constructed-in Lithium Battery
- LED indicators for battery capability, energy standing, SATA
ports exercise, backup standing - Driver much less: want no driver on host facet
- IOPS 130,000 per SATA port
- Information switch charge as much as 200MB/sec
**Please check with
Compatibility Listfor DDR2 RAM Module
Specs:
- SATA 3.0Gbps Interface port
- 240-pin DDR2 DIMM module slots x6
- One CF socket in entrance panel
- Lithium Battery of seven.4V 2400mAh, sufficient to complete the
backup - Dimension: 42(H) x 145(W) x 214 (D) mm
Bundle Content material
- ANS-9010B x1
- Consumer Set up Information x1
- Inside SATA Cable 50cm x1
- 15pin SATA Energy Cable x1
- Screw x4
- Lithium Battery x1
**Product doesn’t embody DDR2 RAM Module