Now Reading
OpenBSD 7.3 on the es40 Dec Alpha emulator!

OpenBSD 7.3 on the es40 Dec Alpha emulator!

2023-05-13 08:49:31

Sure OpenBSD 7.3 Alpha boots, and installs! And it’s extremely sluggish. However it’s operating!

For these impatient simply obtain it right here: OpenBSD73_Alpha_es40.7z

The basis password is: password

I had es40 constructed this from gdwnldsKSC however I amputated the pcap primarily based networking code. I simply wished a clean compile. The set up took over an hour, as there may be ssh keys to generate, and re-ordering and re-linking concerned. All of which I disabled within the above picture. The basis password is password.

Since folks by no means learn this, the password for root is password.

One bizarre factor is that OpenBSD will crash on an assert if you’re utilizing the VGA console, so a serial console is a should. After it boots, as you may see the VGA console works superb.

The video games work simply superb as effectively. I didn’t trouble putting in the compilers because it took endlessly to decompress the bottom file, and I figured when you wished it, you can set up it. Additionally since I amputated the networking, there isn’t any X11.

For these of you who wish to play with digital Dec Alpha stuff this one is fairly easy sufficient.

On the P00>>> immediate kind in

See Also

boot dka0

And very quickly it’ll boot up (takes about 2-3 minutes)

And for these of you who’re into these items:

OpenVMS PALcode V1.98-104, Tru64 UNIX PALcode V1.92-105

beginning console on CPU 0
initialized idle PCB
initializing semaphores
initializing heap
preliminary heap 240c0
reminiscence low restrict = 1b0000 heap = 240c0, 17fc0
initializing driver buildings
initializing idle course of PID
initializing file system
initializing {hardware}
initializing timer information buildings
decreasing IPL
CPU 0 velocity is 1000 MHz
create dead_eater
create ballot
create timer
create powerup
entry NVRAM
Reminiscence dimension 512 MB
testing reminiscence
...
probe I/O subsystem
probing hose 1, PCI
probing hose 0, PCI
probing PCI-to-ISA bridge, bus 1
bus 0, slot 1 -- pka -- NCR 53C810
bus 0, slot 2 -- vga -- Cirrus CL-GD5434
bus 0, slot 4 -- ewa -- DE500-BA Community Controller
beginning drivers
getting into idle loop
initializing keyboard
*** system serial quantity not set. use set sys_serial_num command.
Partition 0, Reminiscence base: 000000000, dimension: 020000000
initializing GCT/FRU at 1c8000
Initializing pka ewa
Reminiscence Testing and Configuration Standing
  Array       Dimension       Base Deal with    Intlv Mode
---------  ----------  ----------------  ----------
    0        512Mb     0000000000000000    4-Approach

     512 MB of System Reminiscence
Testing the System
Testing the Disks (learn solely)
Testing the Community
AlphaServer ES40 Console V7.2-1, constructed on Jun  9 2006 at 15:36:48
P00>>>boot dka0
(boot dka0.0.0.1.0 -flags 0)
block 0 of dka0.0.0.1.0 is a sound boot block
studying 15 blocks from dka0.0.0.1.0
bootstrap code learn in
base = 200000, image_start = 0, image_bytes = 1e00(7680)
initializing HWRPB at 2000
initializing web page desk at 1ff56000
initializing machine state
setting affinity to the first CPU
leaping to bootstrap code

OpenBSD/Alpha Main Boot
VMS PAL rev: 0x4006800010162
OSF PAL rev: 0x400690002015c
Swap to OSF PAL code succeeded.
>> OpenBSD/alpha BOOT 2.0
boot>
booting disk:/bsd: 8562592+683208 [326169+106+499752+320686]=0x9e9790
Unrecognized boot flag '0'.
[ using 1147688 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the College of California.  All rights reserved.
Copyright (c) 1995-2023 OpenBSD. All rights reserved.  https://www.OpenBSD.org

OpenBSD 7.3-current (GENERIC) #133: Wed Could  3 12:45:27 MDT 2023
    [email protected]:/usr/src/sys/arch/alpha/compile/GENERIC
AlphaServer ES40, 1000MHz
8192 byte web page dimension, 1 processor.
actual mem = 536870912 (512MB)
rsvd mem = 2801664 (2MB)
avail mem = 514916352 (491MB)
random: good seed from bootblocks
mainbus0 at root
cpu0 at mainbus0: ID 0 (main), 21264C-6 (go 4.0)
cpu0: structure extensions: 305<PAT,MVI,CIX,BWX>
tsc0 at mainbus0: 21272 Chipset, Cchip rev 0
tsc0: 8 Dchips, 2 reminiscence buses of 16 bytes
tsc0: arrays current: 512MB, 0MB, 0MB, 0MB, Dchip 0 rev 1
tsp0 at tsc0 hose 0
pci0 at tsp0 bus 0
siop0 at pci0 dev 1 operate 0 "Symbios Logic 53c810" rev 0x01: dec 6600 irq 8
scsibus0 at siop0: 8 targets, initiator 7
sd0 at scsibus0 targ 0 lun 0: <DEC, RZ58 (C) DEC, 2000> serial.DEC_RZ58_(C)_DECSRL0000
sd0: 2048MB, 512 bytes/sector, 4194304 sectors
vga0 at pci0 dev 2 operate 0 "Cirrus Logic CL-GD5434-8" rev 0x02
wsdisplay0 at vga0 mux 1
wsdisplay0: display 0-5 added (80x25, vt100 emulation)
dc0 at pci0 dev 4 operate 0 "DEC 21142/3" rev 0x30: dec 6600 irq 20, handle 08:00:2b:e5:40:00
ukphy0 at dc0 phy 0: Generic IEEE 802.3u media interface, rev. 0: OUI 0x000000, mannequin 0x0000
sio0 at pci0 dev 7 operate 0 "Acer Labs M1533 ISA" rev 0xc3
isa0 at sio0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16450, no fifo
com0: console
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0 mux 1
wskbd0: connecting to wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x3bc/4 irq 7
mcclock0 at isa0 port 0x70/2: mc146818 or suitable
tsp1 at tsc0 hose 1
pci1 at tsp1 bus 0
tsciic0 at tsc0
iic0 at tsciic0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
siop0: goal 0 now utilizing 8 bit async xfers
root on sd0a (d4f7f3ff7ccee1b1.a) swap on sd0b dump on sd0b
WARNING: / was not correctly unmounted
Automated boot in progress: beginning file system checks.
/dev/sd0a (d4f7f3ff7ccee1b1.a): 11877 recordsdata, 188223 used, 792736 free (232 frags, 99063 blocks, 0.0% fragmentation)
/dev/sd0a (d4f7f3ff7ccee1b1.a): MARKING FILE SYSTEM CLEAN
pf enabled
beginning community
/and so forth/rc[498]: learn: -p: no coprocess

beginning early daemons: syslogd pflogd ntpd.
beginning RPC daemons:.
savecore: no core dump
checking quotas: finished.
clearing /tmp
kern.securelevel: 0 -> 1
creating runtime hyperlink editor listing cache.
preserving editor recordsdata.
beginning community daemons: smtpd sndiod.
beginning native daemons: cron.
Wed Could 10 04:54:32 MDT 2023
reorder_kernel: failed -- see /usr/share/relink/kernel/GENERIC/relink.log

OpenBSD/alpha (es40.my.area) (tty00)

login:

And there we go!

OpenBSD/alpha (es40.my.area) (tty00)

login: root
Password:
Final login: Tue Could  9 12:00:11 on tty00
OpenBSD 7.3-current (GENERIC) #133: Wed Could  3 12:45:27 MDT 2023

Welcome to OpenBSD: The proactively safe Unix-like working system.

Please use the sendbug(1) utility to report bugs within the system.
Earlier than reporting a bug, please attempt to reproduce it with the most recent
model of the code.  With bug studies, please strive to make sure that
sufficient info to breed the issue is enclosed, and if a
identified repair for it exists, embody that as effectively.

You've gotten new mail.
es40#

Did I point out that the basis password is password?

Source Link

What's Your Reaction?
Excited
0
Happy
0
In Love
0
Not Sure
0
Silly
0
View Comments (0)

Leave a Reply

Your email address will not be published.

2022 Blinking Robots.
WordPress by Doejo

Scroll To Top