Now Reading
Unlocking New Potentialities: StarFive VisionFive 2 SBC Now Helps TianoCore EDK II (UEFI) – VisionFive 2 (English Discussion board)

Unlocking New Potentialities: StarFive VisionFive 2 SBC Now Helps TianoCore EDK II (UEFI) – VisionFive 2 (English Discussion board)

2023-05-15 12:47:12

The StarFive VisionFive 2 is a Single-Board Laptop (SBC) that has not too long ago gained lots of consideration within the tech trade as a result of its highly effective processing capabilities and help for cutting-edge applied sciences. One of many newest developments on this regard is the addition of EDK II help to the StarFive VisionFive 2 SBC.

UEFI is a contemporary firmware interface that gives a extra subtle interface for system initialization, firmware updates, and system administration. It’s changing the normal BIOS (Primary Enter/Output System) that has been used for many years. UEFI provides a variety of advantages over BIOS, together with sooner boot occasions, bigger storage machine help, and extra superior safety features.

The EDK II firmware for the StarFive VisionFive 2 SBC is out there on the StarFive GitHub repository. The repository features a wiki with detailed directions on methods to construct the firmware for the Imaginative and prescient 5 2 SBC. It additionally contains pre-built binaries on the release web page for individuals who need to get began with UEFI instantly.

At the moment, EDK II help on the StarFive VisionFive 2 SBC permits builders besides from SD Card, eMMC, and QSPI flash. This flexibility offers builders the choice to decide on probably the most appropriate storage machine for his or her particular software.For a visible demonstration of booting Linux from UEFI Shell, please discuss with the snapshot beneath:

UEFI Boot Course of:

General, EDK II help on the StarFive VisionFive 2 SBC is a big improvement that additional enhances the board’s capabilities and makes it an much more engaging possibility for builders. With its highly effective JH7110 quad-core RISC-V processor, versatile I/O choices, and now EDK II help, the VisionFive 2 SBC is a flexible and highly effective resolution for a variety of purposes.


I like this. I like having the identical boot course of in every single place, by which I imply methods to set it up and management it, so, unified kernel photos on ESP partitions :wink:
This does already type of work with U-Boot, however its EFI runtime doens’t help storing EFI variables, so issues like setting NextBoot don’t work on U-Boot to simply briefly boot a unique kernel as soon as. (And certain, might try this with kexec, however that’s not the purpose :-P). However U-boot does already help systemd-boot & UKIs, and it does cross the up to date reminiscence map by way of accurately, so no want for an 8G reminiscence DTBO :wink:

I’m positively going to present EDK2 a shot as quickly as I’ve the time. This could permit me to have the very same setup as on my workstation. :slight_smile:

1 Like

See Also

Does it help framebuffer and studying NVMe/USB?

1 Like

Source Link

What's Your Reaction?
In Love
Not Sure
View Comments (0)

Leave a Reply

Your email address will not be published.

2022 Blinking Robots.
WordPress by Doejo

Scroll To Top